The ability to use smart devices to result inspections via the Accela Inspector App is a great tool but it can be frustrating when working in locations with little to no cellular service for the devices. Fortunately, you don't need cellular service or even a Wi-Fi connection to result the inspection, look at record details, or even send a summary report to a customer.
Below are instructions on how to first refresh your system data and second, set the Accela Inspector App to download offline jobs. Before leaving the office or area with a Wi-Fi or cellular connection, do the following: Setup Accela Inspector App in Offline Mode Once you have completed these steps you will be able to access all of the inspection and record information needed to complete your inspection. Please note that you will need to keep the Inspector App open on your device and remain logged in. If you close or log out of the app it will require you to log back in, which won't be possible without either cellular or Wi-Fi service. Note: After completing the above steps test the app to see if it will work by going to the settings on your smart device and switching the device into Airplane Mode. This will disconnect all cellular and Wi-Fi to your phone. Next, navigate back to the app and select an inspection from your job list. From there select "details" and then "view record." When the record/permit opens you should be able see all of the information. For assistance please contact Jerod Broadfoot at [email protected] or via mobile at 541-240-1256. Comments are closed.
|
DisclaimerPlease be aware that this content is relevant at the time it is published, but as time goes on may become out-of-date. We will do our best to keep the content alive and relevant. Archives
August 2024
Categories
All
|
Jurisdiction Resources
© COPYRIGHT 2019. ALL RIGHTS RESERVED.
|